Send to a Friend View / Add Comments  

Some of you have completed our Online Continuing Education Courses which include video instruction. For the rest of you we are sending a weekly series of newsletters featuring an instructional page complete with videos.

To view the videos you will need to download the free Real Player Download Real Player plugin for your browser - if you don't already have it. After installing Real Player, you can view the videos by clicking on one of these icons:

  • Click on this icon Hi Res - Cable/DSL [5622Kb] if you have a cable or DSL connection.
  • Click on this iconLow Res - Modem [1695Kb] if you have a Dial-up connection.

Below is the full course page which includes these videos:


Article 250 Low Res - Modem [1695Kb] Hi Res - Cable/DSL [5622Kb]        Page 5 of 6

General

250.4 General Requirements for Grounding and Bonding

Section 250-2 in the 1999 NEC was revised and relocated to 250.4. It now reads:

(A) Grounded Systems.

(4) Bonding of Electrically Conductive Materials and Other Equipment. Electrically conductive materials that are likely to become energized must be connected together and to the grounded (neutral) terminal at the electrical supply source in a manner that establishes an effective ground-fault current path. Figure 250–6


Figure 250–6
Click on Image to Enlarge
  [ Back to Top ]

Copyright © 2003 Mike Holt Enterprises,Inc.
1-888-NEC-CODE (1-888-632-2633)