Mike Holt Enterprises Electrical News Source

Safety Alert - Product Recall Leviton 50-amp Connector

Electrical safety is our key concern and I'm always looking out for information that will help keep the industry safe. I wanted to pass along this information about a product recall due to shock hazard.

Name of product:
Leviton 50 ampere, non-NEMA electrical connectors, plugs, receptacles and inlets.

Hazard:
The electrical connection devices can have mislabeled terminal markings, posing an electrical shock hazard.

Description:
This recall involves Leviton 50-ampere, non-NEMA electrical connectors, plugs, receptacles and inlet attachment devices. The recalled connection devices are used to transmit power to electrical equipment that is not hard-wired to a power source. Leviton is printed on the devices. Date codes can be found on the back cover of connectors and plugs, the side housing of receptacles and inlets, and on the label of each box. The recall includes the following model/catalog numbers and date codes:

Remedy:
Replace

Recall date:
April 23, 2020

Recall Information:
Health Canada – RA-72649
CPSC – 20-112

Units:
About 98,000 (In addition, about 4,400 units were sold in Canada). The affected products were sold from May 2019 to January 2020.

Hazard identified: The ground and hot wire terminal designations found in the 3-wire versions of the affected products are mislabelled, posing a potential electric shock hazard. Leviton has received four reports of mismarked devices, including one report of a consumer who received an electrical shock, and three reports of minor property damage to equiptment with which the devices were being used

Place of origin:
Manufactured in Mexico

Visit to see full list of Models affected:
Government of Canada Recalls and Safety Alerts
US Consumer Product Safety Commission

Comments
  • Does anyone know what the listing Agency was for this? Was it UL Listed, was it ETL Listed? (I am slowly getting used to ETL, I HIGHLY prefer UL.)

    @Tom Garbo I agree with you about Chinese made equipment. You really need to watch it and be very careful with it. As far as equipment made it Mexico, you get some help in that GE moved a lot of production to Mexico in 1980s, the factories (I speculate) were probably set up niceley. I say this because I have examined a decent share of equipment made in Mexico over the years. It "tends" to be fairly well made - typically better than that made in China. "just my 2c"

    Jeff B.  May 4 2020, 2:30 pm EDT
    Reply to this comment

  • I do not trust any electrical or safety equipment made in mexico or corner cutting inferior china. About 2 years ago Suare D had to.recall over 1 millon safety switches made in mexico.

    Tom Garbo  May 1 2020, 1:34 am EDT
    Reply to this comment


Get notified when new comments are posted here
* Your Email:
 
        
 
Add Your Comments to this Newsletter
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter