This article was posted 05/19/2008 and is most likely outdated.

Worker Deaths by Electrocution
 

 

Topic - Safety
Subject - Worker Deaths by Electrocution

, 2008
This newsletter was sent to 29062 newsletter subscribers

Ask a Question |  Weekly Code GraphicQuizzes |  Free Stuff InstructorsOnline Training Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Worker Deaths by Electrocution

 

A Summary of NIOSH Surveillance and Investigative Findings

 

ImageMany American workers are exposed to electrical energy daily during the performance of their tasks. This monograph highlights the magnitude of the problem of occupational electrocutions in the U.S., identifies potential risk factors for fatal injury, and provides recommendations for developing effective safety programs to reduce the risk of electrocution. This monograph summarizes surveillance data and investigative reports of fatal incidents involving workers who contacted energized electrical conductors or equipment.

 

The hope is that this monograph will serve as a valuable resource for safety and public health professionals, safety and health trainers, researchers, and others who can affect the prevention of occupational electrocutions.

 

Click here to review this monograph from the National Institute for Occupational Safety and Health.

 

 

 

 

 

Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here

 
Comments
  • I am wondering whether welders can experience transient electrical shocks from arc welding where the connecting cable is a long ways away, i.e. at the bottom of a steel structure, or when their clothing is soaked with perspiration.

    And is there any way of measuring such shocks? i.e. Holter device?

    Dan Wurster

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter