This article was posted 10/02/2008 and is most likely outdated.

Investigation on Branch/Feeder Arc Fault Circuit Interrupter Incorporating Equipment Ground Fault Protection
 

 

Topic - AFCI
Subject - Investigation on Branch/Feeder Arc Fault Circuit Interrupter Incorporating Equipment Ground Fault Protection

October 2, 2008
This newsletter was sent to 29997 newsletter subscribers

Ask a Question |  Weekly Code GraphicQuizzes |  Free Stuff InstructorsOnline Training Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

  

Investigation on Branch/Feeder Arc Fault Circuit Interrupter Incorporating Equipment Ground Fault Protection

 

ImageAt the present time the UL Standard for Arc-Fault Circuit-Interrupters (AFCIs) does not require AFCIs to detect a high-impedance fault condition known as a "glowing connection". Paragraph 1.3 of UL 1699 states:

 

These devices are not intended to detect glowing connections.

 

The glowing connection has been documented by a number of technical investigators as a potential ignition mechanism. The purpose of this investigation was to assess the ability of a Branch/Feeder AFCI incorporating ground fault protection to respond to a glowing connection occurring at a wiring device termination. The ability to interrupt such a thermal event is seen as an additional mechanism by which AFCIs may be used to reduce the risk of electrical ignition.

 

Click here to review the UL investigation.

Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here

 
Comments
  • What is the difference between a glowing connection and a glowing heater element, as far as what the breaker sees? Isn't it true that even if you have a glowing connection, and the installation is otherwise code legal, the event will be contained in the box?

    Ken

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter