This article was posted 06/01/2006 and is most likely outdated.

Guidelines for Handling Water-Damaged Electrical Equipment
 

 
Subject - Guidelines for Handling Water-Damaged Electrical Equipment

June 1, 2006  

| Ask a Question |  Code Graphic |  Code Quiz - All New! |  Free Stuff |  Instructors | Feedback
| Online Training |  Products | Seminars | Subscribe | Unsubscribe | Change Email Address |
[ image1 Please Reply With Your Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Guidelines for Handling Water-Damaged Electrical Equipment

 

It’s the first day of hurricane season in the Atlantic and time to start getting prepared if you’re living in hurricane territory. The following is a link to a helpful publication that provides guidelines on how to handle electrical equipment that has been exposed to water through flooding, fire fighting activities, hurricanes, etc. Electrical equipment exposed to water can be extremely dangerous if reenergized without proper reconditioning or replacement. This is important information for everyone to know – including suppliers, installers, inspectors, and even just users of electrical products.

 

Click here to download the entire publication in pdf format.
[ View More Newsletters ] [ Please Reply With Your Comments | View Comments | Notify Me When Comments Are Added ]

F o r w a r d   t h i s   N e w s l e t t e r   t o   a   F r i e n d !
Do you have a friend, relative, or colleague who you think would be interested in receiving this free newsletter? If so, we encourage you to forward this message along to them. If you received this email from someone else, and wish to receive your own free issues of our newsletter, sign up today!

C o n t a c t    I n f o r m a t i o n
 
Copyright © 2002, 2003, 2004, 2005, 2006 Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)
Comments

  • I am wondering how to handle a fire spinkler system that had a broken line. This break watered down 4 stories of a building, 50 to 99% saturation, all wired in mc. What would be the neccessary steps to fix properly. I have tried to contact manufacturers of products with no defined answers. The authority having jurisdiction stated all needs to be replaced, is this neccessary or are there other ways to proceed.

    Justin Millette
Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter