This article was posted 07/18/2006 and is most likely outdated.

The Hazards of Electricity – Do You Know What They Are?
 

 
Topic - Safety
Subject - The Hazards of Electricity – Do You Know What They Are?

July 18, 2006  

| Ask a Question |  Code Graphic Code Quiz - All New! |  Free Stuff Instructors | Feedback
Online Training Products | Seminars | SubscribeUnsubscribe |
Change Email Address |
[ image1 Please Reply With Your Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

The Hazards of Electricity – Do You Know What They Are?

 

The three main hazards of electricity are electric shock, electrical arc-flash, and electrical arc-blast. OSHA statistics show that several hundred deaths occur annually as a result of electric shock. This number has come way down since the introduction of GFCIs but is still a tragedy on an enormous scale. Studies also show that 10-15 employees are hospitalized every day with arc-flash burns. It is for these reasons that it is important that everyone understands the hazards of electricity.

 

Electric Shock

Electric shock occurs when a person’s body completes the current path between two energized conductors of an electrical circuit or between an energized conductor and a grounded surface or object.

 

Electrical Arc-Flash

There seems to be a serious misconception in the industry that electrical arcs are a product of only high voltage. Actually,  electrical arc-flash is not voltage sensitive but is more a product of short-circuit current and clearing time or arc duration. In some cases, it is possible to generate higher arc energy from a low-voltage source than from a high-voltage source. The amount of energy will in turn determine the temperature of the arc, which can reach  20,000°K (Kelvin) or about 35,540°F.

 

Electrical Arc-Blast

According to studies on the subject, the pressures from an arc are developed from two sources, the expansion of metal in boiling and vaporizing, and the heating of air by passage of the arc through it. Copper expands by a factor of 67,000 times when it vaporizes. This accounts for the expulsion of near-vaporized droplets of molten metal from an arc. These droplets can be propelled for distances of up to 10 feet (3 m). Plasma (ionized vapor) is also generated outward from the arc for a distance proportional to the arc power. One inch³ (16.39 cm³) of copper vaporizes into 1.44 yards³ (1.098 m³) of vapor. The air in the arc stream expands in warming up from its ambient temperature to that of the arc, or about 20,000°K (35,540°F). The arc-blast created by the heating of the air is similar in nature to the generation of thunder by the passage of lightning through it.

 

Go to the following link to read the full report presented at the 2006 IEEE IAS Electrical Safety Workshop, February 7-10, 2006, Philadelphia, Pennsylvania.

http://www.ewh.ieee.org/cmte/ias-esw/pdfs/Hazards_of_Electricity.pdf 

 

 

Edited By

David Herres

Wildernesslight1@aol.com

http://www.electriciansparadise.com.

Herres Construction Co.

Balsams Grand Resort Hotel

[ View More Newsletters ] [ Please Reply With Your Comments | View Comments | Notify Me When Comments Are Added ]

F o r w a r d   t h i s   N e w s l e t t e r   t o   a   F r i e n d !
Do you have a friend, relative, or colleague who you think would be interested in receiving this free newsletter? If so, we encourage you to forward this message along to them. If you received this email from someone else, and wish to receive your own free issues of our newsletter, sign up today!

C o n t a c t    I n f o r m a t i o n
 

Copyright © 2002, 2003, 2004, 2005, 2006 Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Comments
  • There is no requirement that there be a separate AFCI circuit for each bedroom. Just wire the bedrooms like you have in the past, just be sure that all bedroom outlets are AFCI protected.



Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter