This article was posted 03/28/2008 and is most likely outdated.

A Comparison of Concrete Encased Grounding Electrodes to Driven Ground Rods
 

 

Topic - Interesting and Important Documents
Subject - A Comparison of Concrete Encased Grounding Electrodes to Driven Ground Rods

March 28, 2008
This newsletter was sent to 28698 newsletter subscribers

Ask a Question |  Weekly Code GraphicQuizzes |  Free Stuff InstructorsOnline Training Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Interesting and Important Documents

 

A Comparison of Concrete Encased Grounding Electrodes to Driven Ground Rods

 

 

ImageThis experimental study by Paul Wiener in 1970 was made to compare the efficacy of concrete encased grounding electrodes to that of driven ground rods for grounding residential and small commercial electric services. This study extended over 14 months and included a very wet winter and a dry summer. The ground resistances of both grounding systems were monitored for the first 5 months. Current from an isolated 120/240-volt system was then circulated through both grounding systems for the following 6 months. At the end of the 14 month period, fault current from power systems of 2.4 to 20 kV were applied to both grounding systems. The ground resistance variations were recorded in all cases.

 

Click here to read the entire study.

Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here

 
Comments
  • I'd like to see this test redone with a modern instrument such as the one from Fluke which uses 50 Hz for a true impedance test and calculates values with a microprocessor. There are even more sophisticated instruments used by professional ground test contractors. The simple DC ohmmeter tests are outdated. They're too primitive for modern installations.

    Bob

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter