Visit MikeHolt.com
Man Electrocuted in Pool After Jumping In to Save Daughter
  
 
Image

A 43-year-old man was electrocuted in the Northern California area on Sunday after he jumped into the swimming pool to rescue his daughter who was in the pool and turning blue.

Marianne Favro of the NBC Bay Area news reported that James Tramel of Burlingame was electrocuted after jumping in to try to save his daughter. He died a short time later at the medical center. His daughter remains in critical condition; a 6-year-old boy, an 8-year-old girl and a 45-year old woman were all treated for related injuries, and released.

Investigators suspect faulty pool wiring sent electricity surging through the water.

Read the full story here.

 

Mike Holt's comment: Our thoughts and prayers go out to the families of this terrible tragedy.

ImageJust a couple of weeks ago we sent out a newsletter with a free PDF publication on the NEC rules governing Article 680 for Swimming Pools, Spas and Similar Installations (3.47KB). Click here (or on the book image) for the link to download and print the PDF, in case you missed it. I would encourage electrical contractors to make sure that they understand these requirements, and to use every opportunity to teach and educate others so that they keep safety a priority.

 

 
Click Here to Post a Comment Click Here to View Comments Click Here to Unsubscribe
 
 
Visit: Exam Preparation | Continuing Education | Code Products | Newsletters | and more
Copyright© Mike Holt Enterprises of Leesburg, Inc. All Rights Reserved This article is protected by United States copyright laws and may not be published without prior written permission.
Mike Holt Enterprises of Leesburg, Inc. 3604 Parkway Blvd. Suite 3 Leesburg, FL 34748
"... as for me and my house, we will serve the Lord." [Joshua 24:15]
Comments

  • These types pool deaths are so hard to read about when there is a simple fix for those where the pool is working and the water is at least as high as the skimmer. BURNDY offers a product BWB680IG and AG for In Ground and Above Ground pools that will maintain constant contact with Ground and the Water. If other electrical issues in the pumps or lighting or externally induced voltage occur, the water and all bonded items will be at the same potential. This also puts the pool in compliance with NEC 680.26C and 680.26B. It will not solve those incidents where pools are not in operation with partial filling and electrical problems. It will be interesting to see the final report on this incident and the root cause analysis. However, based on what we see in the article today, the death could have been avoided with one of these simple devices installed.

    Lee H  April 1 2016, 11:37 am EDT
Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter