This article was posted 08/23/2007 and is most likely outdated.

Buyer Beware - If it's too good to be true, it probably is!
 

 

Topic - Power Quality
Subject - Buyer Beware - If it's too good to be true, it probably is!

August 23, 2007
This newsletter was sent to 26617 newsletter subscribers

Ask a Question |  Weekly Code GraphicQuizzes |  Free Stuff InstructorsOnline Training Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Buyer Beware

If it's too good to be true, it probably is!

 

ImageThere are many opportunities to save money by applying Power Quality solutions and many of these solutions provide energy savings and other savings opportunities beyond their primary intention but it is important to recognize some of the significantly overstated marketing claims by manufacturers. The energy savings claims are often overstated by an order of magnitude (10X) or more. 

 

The intention of this paper was not to argue the detailed technical aspects of each solution, per se, but rather to point out the pitfalls in believing the information publicized regarding these types of equipment. In addition, this paper was assembled in an attempt to show the dramatic change in sales methods for Power Quality solutions over the past several years.

 

Click here for the rest of the story...

 

Mike Holt’s Comment: EPRI (Electric Power Research Institute) is looking to evaluate "energy saving" devices. The following is of interest for the project:

  • Names and information (technical specifications, marketing literature, etc.) for retrofit energy saving devices to help identifying the spectrum of technologies. 
  • Technical papers that address the technology, performance, testing, and evaluation of retrofit energy saving devices. Specifically, technologies that claim energy savings.
  • Site studies and test reports.

EPRI is not seeking general comments, anecdotes, or opinions about particular technologies or manufacturers. If you would like to contribute to this study, please contact Tom Geist at [TGeist@epri.com].

 

 

 

Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here

 
Comments
  • Excellent article. I will save this article to share often. It addresses a lot of the misconceptions about gimmicks to save the cost of power. The best way to save power is to use more efficient equipment and turn off equipment when not in use. I would like to see a similar article that address true cost savings comparisons between such areas as lighting, three phase, instant hot water heating, various type of A/C, etc.

    Bill Bamford

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter