This article was posted 03/22/2006 and is most likely outdated.

The Use of Concrete-Enclosed Reinforcing Rods as Grounding Electrodes
 

 
Topic - Grounding and Bonding
Subject - The Use of Concrete-Enclosed Reinforcing Rods as Grounding Electrodes

March 22, 2006  

| Ask a Question |  Code Graphic Code Quiz - All New! |  Free Stuff Instructors | Feedback
Online Training Products | Seminars | SubscribeUnsubscribe |
Change Email Address |
[ image1 Please Reply With Your Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

The Use of Concrete-Enclosed Reinforcing Rods as Grounding Electrodes

 

The findings of Ufer that metal encased in concrete performs as an effective grounding electrode constitutes a major breakthrough in grounding technology. This has been recognized to the extent that copper wire embedded in the concrete footings of a structure is now an acceptable alternate to driven rods or pipe electrodes in the soil. This comes as a welcome relief from the condition of ineffective grounding by the use of water pipes due to insulated material or couplings and the antagonism of the proprietors of the water pipes.

 

Click here to read this document in its entirety.

 

[ View More Newsletters ] [ Please Reply With Your Comments | View Comments | Notify Me When Comments Are Added ]

F o r w a r d   t h i s   N e w s l e t t e r   t o   a   F r i e n d !
Do you have a friend, relative, or colleague who you think would be interested in receiving this free newsletter? If so, we encourage you to forward this message along to them. If you received this email from someone else, and wish to receive your own free issues of our newsletter, sign up today!

C o n t a c t    I n f o r m a t i o n
 

Copyright © 2002, 2003, 2004, 2005 Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Comments
  • I found the same problem using an older version of Adobe Reader. I updated to Adobe Reader 7 and it worked just fine. Sometimes publishers will intentionally save to an older version for increased compatibility.

    If you continue to have problems after updating your reader it might be the document size is beyond the memory capabilities of your printer. You could try printing it a few pages at a time.

    Cheers,



Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter