This article was posted 06/29/2009 and is most likely outdated.

Smart Plugs
 

 

Topic - Safety
Subject - Smart Plugs

June 29, 2009
This newsletter was sent to 21508 newsletter subscribers

Ask a Question |  Weekly Code GraphicQuizzes |  Free Stuff InstructorsOnline Training Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Smart Plugs? – or not?

Image1

According to data collected by the National Fire Protection Association (NFPA) every year in North America 82,500 major electrical related fires are reported - an additional 890,000 fires go unreported!

Current safeguards, like your breaker/fuse panel, Arc Fault Circuit Interrupters (AFCI), Ground Fault Circuit Interrupters (GFCI) and child shock protectors, provide adequate protection, but not enough, according to Inventor John La Grou.

La Grou’s SafePlug invention has been billed by some as the next generation in residential and commercial electrical delivery. It promises to prevent deadly accidents like house fires -- and to conserve energy by making the electrical systems in our homes “smart”.  It is a technology that combines microprocessors in power outlets and RFID tags in electrical plugs.

TED’s (Technology, Entertainment, Design) talk website has generated much open discussion about this new brand of electrical fault circuit interrupters: the cost involved in replacing receptacles; the concept that safety devices often don't produce a real increase safety because they induce people to behave in a more risky way; whether it would be better suited to businesses and hotels; whether the automation provided by a smart receptacle might be more consistent and effective for only a limited number of homeowners.

And of course, the big issue: whether the government should pass a regulation that imposes every outlet use a technology such as this - with a few hundreds patents and owned by one company!

Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here

 
Comments
  • The one thing that we don't need is any more regulations that cost the home owner any more money. GFI devices serve a good purpose however are being required in excess. Arc fault devices are a joke. This just causes the home owner more money. The problem is that you must educate the people. Most people have enough common sense to use electricity as it is intended. But when you have people with no common sense use appliances that over load circuits and or cause fires, That is where your problem lies. Lets look at the facts. A large percentage of house fires are older homes with old wiring. People are using portable heaters, hot plates etc. Mostly urban homes and in poorer neighborhoods. If anything, the manufacturers of such equipment should be the ones that have to change their equipment and operation. Why are we making 95% of the home owners pay for what the other 5% is causing in house fires etc. Furthermore, I know from a personal experiance that not nearly all the house fires that are supposedly caused by electrical are actually caused by electrical. That is what the fire marshals use when they don't know what really started the fire in the first place. I've seen this proven in court. KEEP GOVERNMENT OUT OF IT!!!! There are enough crazy codes and requirements at the present.

    Brian D. Kimball

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter