Phils Electrical Products

T-33 Standoff Bracket – Cool Product!

 

This product was developed for block wall applications, but it also works well on sheetrock. The bracket has a hole for a 1/2 inch or 3/4 inch connector. It has also been pre-punched for a bond screw. Out of the box the bracket is 2 inches tall but can be manipulated up to 3 inches tall.

 

The T-33 standoff bracket is something no electrician should go without. Don't take chances. Make absolutely sure your box installations meet NEC code!

 

• Keeps J-boxes from being supported by conduit.
• Ensures that J-box installations are code compliant.
• Made from the finest materials available.
• Made in the USA.

 

Visit http://spjinc.com/ to learn more.

 

Mike Holt Comment: Philip Tomkins recently contacted me about the T-33 Standoff Bracket and I felt it was something worth passing on to you.