This article was posted 05/22/2006 and is most likely outdated.

Electrical Hazards Analysis
 

 
Topic - Safety
Subject - Electrical Hazards Analysis

May 22, 2006  

| Ask a Question |  Code Graphic Code Quiz - All New! |  Free Stuff Instructors | Feedback
Online Training Products | Seminars | SubscribeUnsubscribe |
Change Email Address |
[ image1 Please Reply With Your Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Electrical Hazards Analysis

 

For the most part, the electrical industry, at least at the user level, has largely ignored the subject of electrical hazards. There is a tendency to react to catastrophic accidents, rather than proactively trying to predict and prevent them. Recent changes in consensus standards, along with a better general understanding of the seriousness of electrical hazards have resulted in a renewal of interest in the subject.

 

As this awareness increases, the understanding of phrases like: “Limited Approach Boundary”, “Restricted Approach Boundary”, “Prohibited Approach Boundary”, and “Flash Protection Boundary” is essential. Below are the definitions of these terms as found in NFPA 70E-2004, Article 100: [1]

 

Limited Approach Boundary - “An approach limit at a distance from an exposed live part within which a shock hazard exists.”

 

Restricted Approach Boundary - “An approach limit at a distance from an exposed live part within which there is an increased risk of shock, due to electric arc over combined with inadvertent movement, for personnel working in close proximity to the live part.”

 

Prohibited Approach Boundary  - “An approach limit at a distance from an exposed live part within which work is considered the same as making contact with the live parts.”

 

Flash Protection Boundary - “An approach limit at a distance from exposed live parts within which a person could receive a second degree burn if an electrical arc flash were to occur.”

 

Click here to read the full Electrical Hazards Analysis conducted by AVO Training Institute, Inc. The AVO Technical Resource Center provides electrical reference books, industry standards, training materials, personal protective equipment, insulated hand tools, and safety tools.

[ View More Newsletters ] [ Please Reply With Your Comments | View Comments | Notify Me When Comments Are Added ]

F o r w a r d   t h i s   N e w s l e t t e r   t o   a   F r i e n d !
Do you have a friend, relative, or colleague who you think would be interested in receiving this free newsletter? If so, we encourage you to forward this message along to them. If you received this email from someone else, and wish to receive your own free issues of our newsletter, sign up today!

C o n t a c t    I n f o r m a t i o n
 

Copyright © 2002, 2003, 2004, 2005, 2006 Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Comments
  • interesting!

    jBenjamin Scoville

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter