This article was posted 06/09/2008 and is most likely outdated.

DeWALT Recalls Cordless Drills due to Fire Hazard
 

 

Topic - Safety
Subject - DeWALT Recalls Cordless Drills due to Fire Hazard

June 9, 2008
This newsletter was sent to 29180 newsletter subscribers
Ask a Question |  Weekly Code Graphic |  Quizzes |  Free Stuff |  Instructors | Online Training |  Products | Seminars | Subscribe | Unsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

NEWS from CPSC

U.S. Consumer Product Safety Commission

Office of Information and Public Affairs

Washington, DC 20207

FOR IMMEDIATE RELEASE
December 20, 2007
Release #08-143

DeWalt’s Recall Hotline: (888) 742-9168
CPSC Recall Hotline: (800) 638-2772
CPSC Media Contact: (301) 504-7908

 DeWALT Recalls Cordless Drills due to Fire Hazard

 

WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed.

Name of Product: DEWALT Cordless Drills

Units: About 346,000

Manufacturer: DEWALT Industrial Tool Company, of Towson, Md.

Hazard: The trigger switch of the cordless drill can overheat, posing a fire hazard to consumers.

Incidents/Injuries: DEWALT has received 11 reports of trigger switches overheating. No injuries or property damage have been reported.

Description: This recall involves DEWALT individual cordless drills listed below:

Model Number

Description

Date Codes

DC920

Heavy-Duty XRP™ 1/2” (13mm) 18 Volt Cordless Drill/Driver

200723 through 200742

DC930

Heavy-Duty XRP™ 1/2" (13mm) 14.4 Volt Cordless Drill/Driver

200625 through 200746

DC935

Heavy-Duty XRP™ 1/2" (13mm) 14.4 Volt Cordless Hammerdrill/Drill/Driver

200627 through 200746

DC936

Heavy-Duty XRP™ 1/2" (13mm) 14.4 Volt Cordless Hammerdrill/Drill/Driver

200635 through 200746

DC940

Heavy-Duty XRP™ 1/2" (13mm) 12 Volt Cordless Drill/Driver

200635 through 200746

The model number is printed on a sticker on the side of the unit. The date code is embossed on the bottom of the unit. Units stamped with an “M” following the date code have been repaired and are not included in this recall. The packaging of repaired drills has a green dot sticker near the UPC label.

Sold at: Wholesale distributors and retailers from about June 2006 through December 2007 for between $180 and $280.

Manufactured in: Mexico

Remedy: Consumers should stop using the drills immediately and contact DEWALT for the location of the nearest service center to receive a free inspection and, if necessary, free repair.

Consumer Contact: Call DEWALT toll-free at (888) 742-9168 between 8 a.m. and 5 p.m. ET Monday through Friday or visit firm’s Web site at www.DEWALT.com

Image

 

 

 
Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here
 
Comments

  • The urge to cut costs bites another company & its products. You search for the cheapest labor and cheapest parts to make the cheapest product and you get what you pay for. I'd file this under the high cost of cheap.

    Of course we the consumer demand cheap. A friend's business sells the $17 Chinese made calipers. He got grief from the customers over not selling any American made, so he bought a small quantity of Starrett brand at a few times the cost. They gathered dust on the shelf - none sold. None of the grousers bought the American made, they just wanted to hear themselves talk. And Starrett sells foreign made too. I have a gage block set from them that is made overseas.

    We're all to blame.

    Matt
Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter