376.23 Wireway Sizing
Part II. Installation
Revisions to this rule should clear up the issue regarding the sizing of metal wireways as it relates to conductor bending space as it relates to Table 312.6(A).
(A) Sizing for Conductor Bending Radius. Where conductors are bent within a wireway, the wireway must be sized to meet the bending radius requirements contained in Table 312.6(A), based on one wire per terminal. Figure 376-1
|If you have already been approved for reprint permission, you may right mouse click on the link above and choose "Save Target As ..." or "Save Link As ..." to save the file to your local computer.
|©2005 Mike Holt Enterprises, Inc.