Fire Alarm Systems
760.42 Equipment Marking
This section was revised to clarify that “power-limited equipment” supplying power-limited fire alarm circuits must be durably marked to indicate each power-limited circuit. This change was necessary because some wiring method manufacturers were advertising that boxes and raceways had to be identified with the "color red" to meet this requirement.
Fire alarm equipment supplying PLFA circuits must be durably marked to indicate each circuit that is a power-limited fire alarm circuit.
|If you have already been approved for reprint permission, you may right mouse click on the link above and choose "Save Target As ..." or "Save Link As ..." to save the file to your local computer.
|©2005 Mike Holt Enterprises, Inc.